DIY Parabolic lights Installation Guide

[Nexus]

The one piece parabolics is slightly more difficult as it involves removing the front bumper. Below is a picture that show the removal of the bumper.
Some people are lazy and will just loosen enough to flex the bumper for enough clearence for the one piece parabolics to fit in. Just be careful to put a cloth to prevent scratching your beautiful paint work.

Removal of Bumper in general:



The one piece parabolics should go straight in without major issues, you need to relax and just find the fitting. In some cases, headlight bracket will be required to be removed in order to fit the lights in.

Enjoy Your parabolics.

PM me to edit any changes, keep the thread clean

Acknowledgements
Rally Art
Icarian
DVS
Ashneel
Heathyoung

[Ashneel]

excellent right up man. nice detailed explaination of the whole process.

[s_tim_ulate]

Good work Nexus!

Please submit any additions/corrections into this thread and myself or Nexus will edit accordingly.

[DVS]

Great work, now everyone will now PM you instead of me.

[BillionaireBoysClub]

Thanks for this guide, my one piece parras will be arriving any time soon, bit gutted that i have to take the bumper off though

[Nexus]

Thanks for this guide, my one piece parras will be arriving any time soon, bit gutted that i have to take the bumper off though

Let me know if you need help, I am in Perth as well.

[Rondog]

Forgive the ignorant question, where can you get para's?

[BillionaireBoysClub]

Let me know if you need help, I am in Perth as well.

Thanks nexus, appreciate it mate

[M4DDOG]

Ok dumb question time:
I am installing one piece paras, so all i have to do is ground the red wire (with the end that connects to the plug) and that's it?, i plug it in and it all works? Or have a i missed something?
Also what are the max wattages you would put in parkers, low and high beam? I'm looking at getting some of the phillips globes, but not sure on how bright i can go?

[Icarian]

Thanks for this guide, my one piece parras will be arriving any time soon, bit gutted that i have to take the bumper off though

Irwin, thats a damn sexy TJ to have in the pics...

Hey Mate, Nexus and I actually got my 1 peice paras in without removing the bumper. We did however undo alot of bolts etc and simple flex the bumper a bit to get them in. Ralliart-Akko was saying to me that he also did it this way on his old exec. I think he said he unbolted the metal shweet of the front quater panel and flexed that too. If you want a hand Nexus is the man, I can come give you a hand but he is the one you want for the wiring.

Iriwn, great work mate. I hope people appriciate all the effort you put into it, you should start a Para Installation Company.